Polyquat 60 Dose

Understanding Polyquat 60 in Swimming Pools

Polyquat 60 is a non-copper, non-foaming algaecide commonly used for routine maintenance and pool closing. It helps reduce algae growth by interfering with algae cells, but it does not replace chlorine or proper filtration.

Maintenance vs. Closing Doses

Maintenance doses are usually smaller and may be added on a regular schedule. Closing doses are often higher because the pool may remain covered and untreated for an extended period. Always use the exact rate printed on your product label.

Why Pool Volume Matters

Polyquat dosing is normally listed per 10,000 gallons. An accurate pool-volume estimate helps prevent underdosing or wasting product. This calculator also converts liters to U.S. gallons before applying the label rate.

Best Practices

• Balance the pool water before adding Polyquat 60.
• Maintain proper chlorine levels unless the product label says otherwise.
• Distribute the product around the pool with the circulation system running.
• Allow adequate circulation before covering or closing the pool.
• Use only the concentration and dose shown on your product label.

What Polyquat 60 Does Not Do

Polyquat 60 does not sanitize the water, remove existing heavy algae by itself, or correct poor circulation. If the pool is already green, restore chlorine and filtration first before relying on a maintenance algaecide.